Geek Level 1
Are your window tracks in need of a good clean?
Follow these simple steps to remove a track from a sliding window frame, clean it, and replace it.
The first step is to remove the window so you can access the track. Don’t worry. This isn’t as hard as it sounds.
Begin by fully opening your slider window. Using one hand on each side, pull the window up into the top of the frame. Now pull the top of the window down and out of the frame. See? That wasn’t so bad!
Top Tip: Place the window down gently somewhere out of the way where it will not fall over or get damaged.
On one end of the window track, gently slide a flat pry bar between the window frame and track. As you gently twist the pry bar, the window track should pop out easily and then you can pull the track out fully. Now you can give it a clean, as well as the area underneath on the frame.
Simply insert the track tightly into one end of the window frame and snap it back into place from one end to the other. Ensure the track is snapped fully down into the frame or it will prevent the window from sliding properly.
Using one hand on each side of the sealed unit, insert the top into the window frame. Swing the bottom into place, and then gently push it down. Open and close the window so you know that it is sliding properly, and test the night lock in both positions to ensure it is operating correctly.
Centra Windows is not only the manufacturer but also the installer of its product, which enables us to offer a full warranty, eliminating any confusion between product performance and installation. We view the house as a system and understand how each of the elements must work correctly to maximize the comfort and energy efficiency of your home. Contact our local Employee Owners at 1-888-534-3333 or send us an email at firstname.lastname@example.org for more information about this topic and many more. You can also sign up for our biweekly newsletter for all the tips and tricks about the window industry.
Geek Level 1