To clean your window tracks, follow these few simple steps to remove the track from the window frame:

Remove the window:

  • Fully open the Slider Window
  • Using one hand on each side, pull the window up into the top of the frame
  • Pop the bottom of the Window out of the frame
  • Pull the top of the Window down and out of the Frame and set it aside in a secure location where it will not fall over and get damaged

Remove the track:

  • On one end of the window track, gently slide a Flat Pry Bar between the Window Frame and Track. As you gently twist the pry bar, the window track will pop out easily and you will be able to pull the rest of the track out quite easily

Reinstall the track into the Window Frame:

  • Simply insert it tightly into one end of the Window frame and snap it back into place from one end to the other
  • Ensure the track is snapped fully down into the frame or it will prevent the window from sliding properly

Reinstall the Window into the frame:

  • Using one hand on each side of the Sealed Unit, insert the top of the unit into the Window Frame
  • Swing the bottom into place and gently push it down and back into place
  • Open and close the window to ensure it is sliding properly, and test the Night Lock in both positions to ensure it is operating correctly

Additional Tips and Tricks

Tools Required:

  • Flat Pry Bar or Putty Knife
Live Chat